LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 637 (Speed Control -- Discovery/L462) >> Speed Control >> Speed Control Switch >> Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Make the Supplemental Restraint System (SRS) safe.

    Refer to: STANDARD WORKSHOP PRACTICES .

  2. Disconnect the startup battery ground cable.

    Refer to: SPECIFICATIONS .

  3. Remove the driver airbag.

    Refer to: DRIVER AIRBAG MODULE .

  4. NOTE: Make sure that the harness is routed to the position noted on removal.
    G11599943
    • Remove the retaining screws.
    • Partially remove the paddle shifter.
    • Disconnect the electrical connector.
    • Remove the paddle shifter.
  5. G11701195
    • Remove the retaining screw.
    • Disconnect the electrical connector.
    • Remove the speed control switch.
scientia non olet · About LEMON Manuals