Wheel Alignment - Specifications & Adjustments: Toe-In
If toe-in is not to specifications, disconnect steering arm at rack end. Loosen lock nut on steering end fitting. To increase toe-in, unscrew end fitting. To decrease, screw in fitting. Tighten lock nut and connect steering arm. Recheck toe-in.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | |
|---|---|---|---|---|---|
| Inner | Outer | ||||
| All Models | 4 | 1 1/2±1/2 | -1/8 to 1/8 | ...... | ...... |