Specifications Index
9-3 SPECIFICATIONS INDEX
| System | Specification/Procedure | |
|---|---|---|
| Air Conditioning - Automatic System | ||
| Service | SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Air Conditioning - Manual System | ||
| Service | SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Axle Shaft Hub Nut | 125 Ft. Lbs. (170 Nm) Plus 45 Degrees | |
| Battery | TECHNICAL DATA | |
| Brakes | ||
| Bleeding Sequence | BLEEDING PROCEDURE | |
| Disc Brakes | DISC BRAKE SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Charging | ||
| Generator | GENERATOR SPECIFICATIONS | |
| Torque | NA | |
| Drive Belts | ||
| Adjustment | BELT TENSION CHECKING | |
| Belt Routing | DRIVE BELT ROUTING | |
| Engine Cooling | ||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | |
| Radiator Cap Pressure | 14-15 psi (97-103 kPa) | |
| Thermostat R&I | THERMOSTAT (B204I/E) or THERMOSTAT (B235R, B205L/R) | |
| Water Pump R & I | COOLANT PUMP (B204I/E) or COOLANT PUMP (B235R, B205L/R) | |
| Engine Mechanical | ||
| Compression | GENERAL DATA | |
| Oil Pressure | OIL PRESSURES | |
| Overhaul | ENGINE SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | |
| Flywheel/Flex Plate Torque | 59 Ft. Lbs. (80 Nm) | |
| Fuel System | ||
| Fuel Filter Location | Located in delivery line between fuel pump and fuel rail at front of fuel tank on right-hand side. Filter is protected by a cover. | |
| Fuel Filter R & I | FUEL FILTER | |
| Pressure Release Procedure | Remove fuse 32 for fuel pump while engine is running. Switch off ignition once engine stops. Refit fuse. | |
| Pressure Specifications | FUEL PUMP | |
| Fuel Pressure Test Procedure | CHECKING FUEL PRESSURE | |
| Ignition | ||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | |
| Ignition Wires (Routing) | NA | |
| Spark Plugs | ||
| Type | NGK PFR 7H-10 | |
| Gap | .039" (1.00 mm) | |
| Torque | 21 Ft. Lbs. (28 Nm) | |
| Starting | ||
| Starter | TECHNICAL DATA | |
| Torque | TORQUE SPECIFICATIONS | |
| Wheel Alignment | ||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Wheel & Tire | ||
| Lug Stud Torque | TORQUE SPECIFICATIONS | |