LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2003 >> 9-3 Vector, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (TC/Abs System Version 5.3 - Repair) >> Adjustment - Replacement >> Wheel sensor, front left >> To remove
April 5, 2026: LEMON Manuals is launched! Read the announcement.

To remove

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Illustration For Steps 2, 3 & 5
G03505515Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Open the bonnet.
  2. Detach the main fuse box and move it aside.
  3. Separate the connector, press in its catch and remove it from the bracket.
  4. Snip the cable tie on the suspension strut tower.
  5. Unplug the level sensor's connector. Also detach the expansion tank and move it aside.
  6. Raise the car and remove the wheel.
    Fig 2: Illustration For Steps 8-10
    G03505516Courtesy of SAAB-SCANIA OF AMERICA, INC.
  7. Clean the area round the wheel sensor using a soft wire brush.
  8. Undo the wheel sensor retaining bolt and remove the wheel sensor.
  9. Remove the grommet and withdraw the lead.
  10. Detach the lead from the clips and lift out the sensor.
scientia non olet · About LEMON Manuals