Recalling memory setting
WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
To activate the memory function, hold down the desired memory button until the seat has assumed the stored memory settings.
The control module reads all Hall sensors and controls the motors until the seat position corresponds to that stored in the seat memory or until the memory button is released. If the seat has not assumed the correct position within 1 minute, the control module interrupts the power supply to the motors.
If the control module detects a fault on any Hall sensors, the motor concerned will be stopped.