Mobilizing The Car: General: Notes
WARNING: This page is about a different car, the 2002 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
The car is mobilized as follows:
- When the key is inserted in the ignition and turned to the ST position (+50) to start the car, the car is mobilized when ON (+15 circuit) is passed.
- The car can also be mobilized with the remote control if the key is first turned to ON and then one of the buttons on the remote control is pressed once. This can be used in the case of a fault on the transponder or "receiver".
If TWICE does not receive the identification code from the transponder, the message KEY NOT ACCEPTED is shown on the SID display.