Memory Retrieval
WARNING: This page is about a different car, the 2002 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
The seat position is programmed/stored as follows:
- Set the seat to the required position using the adjustment switch.
- Program the settings by simultaneously pressing the "M" button and one of the memory buttons 1, 2 or 3.
- When the settings have been stored, SID gives an acoustic signal.
When settings are being stored in memory, the control module reads all Hall sensors and stores their values in an internal seat memory. The seat memory is non-volatile and retains the data even when the control module power is turned off.