LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2004 >> 9-3 Linear, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Control Module >> Adjustment - Replacement >> Telematics unit (468), CV >> To fit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

To fit

  1. Fit the bracket to the telematics unit.
  2. Place the telematics unit in fitting position.
    Fig 1: Illustration For Step 2
    G03719156Courtesy of SAAB-SCANIA OF AMERICA, INC.
    IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION  .
  3. Plug in the connector.
    Fig 2: Illustration For Step 3
    G03719157Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Fit the two bracket bolts.
    Fig 3: Illustration For Step 4
    G03719158Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. Fit the front luggage compartment trim.
    Fig 4: Illustration For Step 5
    G03719159Courtesy of SAAB-SCANIA OF AMERICA, INC.
  6. Carry out procedures after changing a control module. See PROCEDURE AFTER CHANGING CONTROL MODULE  .
scientia non olet · About LEMON Manuals