To fit
WARNING: This page is about a different car, the 2003 Saab 9-3 and 2002 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
- Fit the control module, one screw.
- Plug in the connector
- Make sure the engine can be started.
- Replace the carpet.
- Fit the glove box.
- Reset the immobilizer in the following way:
- Connect Tech2 and turn the ignition to ON
- Select Body and TWICE
- Select Immobilizing. The immobilizer will be programmed after about 10 seconds.