Engine Control Module (ECM): Adjustment/Replacement: Removal

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Remove the lower inner trim of passenger side.

Detach the floor mat of front passenger seat.

Remove the protect cover.

Fig 2: Removing Protect Cover

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Remove the nuts (A) which hold ECM to the bracket.

Remove the clip (B) from the bracket.

Fig 3: Removing ECM

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Disconnect the ECM connectors and take out the ECM.