Specifications Index
9-3 SPECIFICATIONS INDEX
| System | Specification/Procedure | |
|---|---|---|
| Air Conditioning | ||
| Service | TECHNICAL DATA | |
| Torque | TIGHTENING TORQUES | |
| Axle Shaft Hub Nut | 170 Ft. Lbs. (230 Nm) | |
| Battery | TECHNICAL DATA | |
| Brakes | ||
| Bleeding Sequence | BLEEDING THE BRAKE SYSTEM | |
| Disc Brakes | TECHNICAL DATA | |
| Torque | TIGHTENING TORQUES | |
| Charging | ||
| Generator | TECHNICAL DATA | |
| Torque | NA | |
| Drive Belts | ||
| Adjustment | NA | |
| Belt Routing | DRIVE BELT, AUXILIARY ASSEMBLY (POLY-V) | |
| Engine Cooling | ||
| General Service Specifications | COOLING SYSTEM | |
| Radiator Cap Pressure | 20-22 psi (1.4-1.5 bar) | |
| Thermostat R& I | THERMOSTAT | |
| Water Pump R & I | COOLANT PUMP | |
| Engine Mechanical | ||
| Compression | GENERAL DATA | |
| Oil Pressure | GENERAL DATA | |
| Overhaul | TECHNICAL DATA | |
| Torque | TIGHTENING TORQUE | |
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | |
| Flywheel/Flex Plate Torque | ||
| Solid Flywheel | 49 lbf ft + 25° (53 Nm + 25°) | |
| Dual Mass Flywheel | 44 lbf ft +30° (60 Nm +30°) | |
| Fuel System | ||
| Fuel Filter Location | Located in fuel pump. | |
| Fuel Filter R & I | FUEL PUMP | |
| Pressure Release Procedure | Remove fuse No. 2 in the main fuse box in front of the battery for fuel pump while engine is running. Switch off ignition once engine stops. Refit fuse. | |
| Pressure Specifications | FUEL SYSTEM | |
| Fuel Pressure Test Procedure | CHECKING FUEL PRESSURE | |
| Ignition | ||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | |
| Ignition Wires (Routing) | NA | |
| Spark Plugs | ||
| Type | NGK PFR 6T-10G | |
| Gap | .039" (1.00 mm) | |
| Torque | 21 Ft. Lbs. (28 Nm) | |
| Starting | ||
| Starter | TECHNICAL DESCRIPTION | |
| Torque | NA | |
| Wheel Alignment | ||
| Adjustment Specifications | WHEEL GEOMETRY | |
| Torque | See specific procedure in FRONT SUSPENSION | |
| Wheel & Tire | ||
| Wheel Stud Torque (Aluminum) | 81 Ft. Lbs. (110 Nm) | |
| Wheel Stud Torque (Steel) | 37 ft. lbs. +90° +90°,(max. 81 ft. lbs.); 50 Nm +90° +90° (max. 110 Nm) | |