Programming, headlamps: Notes
The DICE control module can be programmed for three different types of headlamp logic:
IMPORTANT:
Switching between main and dipped beams is only possible with the light switch in position 2. Applies to all alternatives.
The fuse 35 has been removed from cars on markets where daylight driving lights are not used. Program alternatives 1 and 2.
While the engine is being started, the dipped beam is turned off. This is irrespective of the program alternative if the light switch is in position 0 or 1, but for safety reasons it is maximized to 20 seconds.
The fuse 35 has been removed from cars on markets where daylight driving lights are not used. Program alternatives 1 and 2.
While the engine is being started, the dipped beam is turned off. This is irrespective of the program alternative if the light switch is in position 0 or 1, but for safety reasons it is maximized to 20 seconds.