LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2007 >> 9-7X 5.3i >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Functions >> Repair Instructions >> Transmitter Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmitter Programming

IMPORTANT: All transmitters which are to be recognized by the Liftgate Module (LGM) must be programmed in a single programming sequence. If the system is placed in program mode it will erase all previously programmed transmitters upon the receipt of the programming signal from the first transmitter. Up to 4 transmitters can be programmed. Do not operate or program the transmitters in the vicinity of other vehicles that are in the keyless entry program mode. This prevents the programming of the transmitters to the incorrect vehicle.
  1. Install a scan tool.
  2. Turn the ignition ON, with the engine OFF.
  3. Use the scan tool in order to access the Lift Gate Module (LGM) Special Function: Program Key Fobs menu.
  4. Follow the directions on the scan tool in order to program the transmitters.
  5. Operate the transmitter functions in order to verify correct system operation.
scientia non olet · About LEMON Manuals