LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2009 >> 9-7X 4.2i >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Data Communications >> Repair Instructions >> Liftgate Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Liftgate Module Electrical Connectors
    GM749979Courtesy of GENERAL MOTORS CORP.
  1. Install the module to the liftgate.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the bolts that retain the module to the liftgate and tighten to 10 N.m (89 lb in).
  3. Connect the electrical connectors (3) as necessary.
  4. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
  5. Program the liftgate control module. Refer to Control Module References .
scientia non olet · About LEMON Manuals