To remove

WARNING: This page is about a different car, the 2009 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

Carry out procedures before removing a control module .
Remove the steering wheel. See STEERING WHEEL .
Remove the gaiter from the control module and press it against the instrument panel.

Fig 1: Removing Gaiter
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Remove the control module from the steering shaft. Press in the steering column while pulling the control module outwards.

Fig 2: Press In The Steering Column While Pulling The Control Module Outward
Courtesy of SAAB-SCANIA OF AMERICA, INC.

IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins.
For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
Unplug the connector and remove the clip.

Fig 3: Identifying Control Module Connector
Courtesy of SAAB-SCANIA OF AMERICA, INC.