Control module in transport mode
WARNING: This page is about a different car, the 2009 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
A control module in transport mode is a new unit that has not been programmed previously.
"Added" and "removed" control module
A used control module has previously been "added" and then "removed" from the car using Tech2.
"Remove":
Before a control module is removed, Tech2 must be used to divorce the module from the car. Go in under the "All" menu and select the control module under "ADD/REMOVE ". Then select "Remove" and follow the instructions.
"Add":
After fitting or SPS programming, Tech2 is to be used to marry the control module to the car. Go in under the "All" menu and select the control module under "ADD/REMOVE ". Then select "Add" and follow the instructions.