| Operating Conditions:
Ignition ON |
| In Park Switch Status |
On/Off |
The scan tool displays Off or On. On is displayed if the vehicle was in Park during the last open or close history data. |
| Liftgate Angle |
0° |
The scan tool displays the calculated angle in degrees of the liftgate relative to the liftgate latch. |
| Liftgate Front Control Switch |
Active/Inactive |
The scan tool displays Active or Inactive. This is the state of the front control switch of the liftgate module. |
| Liftgate Handle Switch |
Active/Inactive |
The scan tool displays Active or Inactive. This is the state of the liftgate handle switch. |
| Liftgate Mode Switch |
Varies |
The scan tool displays the current setting of the mode switch in Counts which varies depending upon if the switch is in the Off, 3/4 or Max position and the system voltage. |
| Liftgate Rear Close Switch |
Active/Inactive |
The scan tool displays Active or Inactive. This is the state of the liftgate shutface switch. |
| Liftgate Latch Pawl Switch |
Active/Inactive |
The scan tool displays Active or Inactive. This is the state of the latch pawl switch. |
| Liftgate Latch Ratchet Switch |
Active/Inactive |
The scan tool displays Active or Inactive. This is the state of the latch ratchet switch. |
| Liftgate Latch Sector Switch |
Active/Inactive |
The scan tool displays Active or Inactive. This is the state of the latch sector switch. |
| Liftgate System Voltage 1 |
11.5-13.0 V |
The scan tool displays the battery system 1 voltage input to the liftgate module. |
| Liftgate System Voltage 2 |
11.5-13.0 V |
The scan tool displays the battery system 2 voltage input to the liftgate module. |
| Secondary Obstacle Detection Liftgate |
3-3.5 V |
The scan tool displays the actual voltage on the liftgate object sensor circuit. Voltage is measured by the liftgate module. |