Toe-In Adjustment (Front)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Saturn SW2, 1995 Saturn SW1, 1995 Saturn SL2, 1995 Saturn SL1, and 1995 Saturn SL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If front wheel toe-in requires adjustment, check and adjust rear wheel camber and toe-in and front camber and caster first.
Lock steering wheel in straight-ahead position. Loosen tie rod end lock nut. See Fig 1 . Loosen steering gear dust boot clamp(s) at tie rod end. Turn tie rod end to obtain correct toe-in. Tighten lock nut to specification. See TORQUE SPECIFICATIONS . Ensure steering gear dust boot is straight after adjustment. Tighten dust boot clamp.