Installation (Driver-Side)

WARNING: This page is about a different car, the 1995 Pontiac Firebird and 1995 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Install horn contact, steering wheel inflator module connector, and CPA clip. Install inflator module to steering wheel. Tighten inflator module screws to proper specification. See TORQUE SPECIFICATIONS.
To complete installation, reverse removal procedure. Reactivate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM. Check AIR BAG warning light to ensure system is functioning properly. See SYSTEM OPERATION CHECK.