Right Hand Drive Postal Vehicle

Description:

REMOVAL
1. Remove powertrain control module.
2. Loosen ABS control module attachment nut at cross car beam and lift ABS control module upward (towards windshield) to disengage ABS control module from ABS/PCM bracket. Remove nuts holding PCM bracket to steering column support bracket.
3. Remove PCM bracket.

INSTALLATION
1. Install PCM bracket stud and pilot pin through hole in steering column support bracket.
2. Install and torque nut.

Torque: 6 NM (54 in. lbs)

3. Install powertrain control module.