LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> LS2 Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Overhaul - Fm5 Series 5-Speed >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Axle Seal Retainer Bolt 18 (24)
Back-Up Light Switch 18 (24)
Control Assembly Rod-To-Control Shaft Lever Pinch Bolt (1)
Flywheel-To-Engine Bolt
Saab 9-3 (2)
Saab 9-5 59 (80)
Saturn (3)
Gear Change Mechanism Bolt 18 (24)
Input Shaft Bearing Retainer Bolt 28 (38)
Oil Drain Plug 37 (50)
Oil Fill Plug 37 (50)
Output Shaft Bearing Retainer Bolt (4)
Pressure Plate-To-Flywheel Bolt
Saab 9-3 & 9-5 16 (22)
Saturn 11 (15)
Rear Cover Mounting Bolt 18 (24)
Reverse Gear Shaft Support Bolt 18 (24)
Reverse Shift Lever Assembly Bolt 18 (24)
Ring Gear Bolt (5)
Shift Shaft Bolt 18 (24)
Slave Cylinder Bolt 7 (10)
Transaxle Case-To-Clutch Case Bolt 18 (24)
Transaxle Mount-To-Transaxle Bolt 41 (55)
Wheel Lug Nut
Saab 9-3 81 (110)
Saab 9-5 90 (120)
Saturn 92 (125)
(1) Tighten to 9 ft. lbs. (12 N.m), and then an additional 180 degrees.
(2) Tighten in a crisscross pattern to 15 ft. lbs. (20 N.m), and then an additional 50 degrees.
(3) Tighten in a crisscross pattern to 39 ft. lbs. (53 N.m), and then an additional 25 degrees.
(4) Install and alternately tighten 3 middle screws to 33 ft. lbs. (45 N.m). Then install and tighten outermost screw to 18 ft. lbs. (24 N.m).
(5) Tighten in a crisscross pattern to 15 ft. lbs. (20 N.m), and then an additional 90 degrees.
scientia non olet · About LEMON Manuals