Transaxle Specifications
TRANSMISSION SPECIFICATIONS
| Measurement | In. (mm) | |||||
|---|---|---|---|---|---|---|
| Axial Play | ||||||
| Between 2nd & 3rd Drive Gears | .002-.016 (.05-.40) | |||||
| Between 4th Drive Gear & Input Shaft Bearing | .002-.016 (.05-.40) | |||||
| Between Reverse Gear & Reverse Gear Washer | .004-.008 (.10-.20) | |||||
| Input Shaft | .004-.006 (.09-.15) | |||||
| Output Shaft | (1) | |||||
| Blocking Ring Clearance | ||||||
| 1st & 2nd Gears | .003 (.80) | |||||
| 3rd, 4th, 5th & Reverse Gears | .002 (.50) | |||||
| Preload | ||||||
| Input Shaft | (2) | |||||
|
||||||