LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> SC2 Automatic, MP6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Anti-Theft System) >> Programming >> Replacing Ignition Key (No Spare Key Available) >> Determining BCM Programmed Key Code
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Determining BCM Programmed Key Code

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: To determine unknown BCM key code, use Interrogator (J-35628-A) and Adapter (J 25628-A) and the following procedure.
  1. Remove knee bolster under steering column. Connect Adapter (J-35628-A) wiring to Yellow 3-pin PASS-Key(R) dash connector at base of steering column. DO NOT connect to steering column wiring.
  2. Turn on Interrogator and move key code switch to "1" position and attempt to start engine using blank key. If engine starts, key code is "1". If engine does not start, turn ignition off and press 4-minute timer on Interrogator.
  3. When timer indicator light goes out, move key code switch to next number and attempt to start engine. If engine does not start, continue trying different key codes until proper key code is determined.
scientia non olet · About LEMON Manuals