LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Analog Instrument Panels) >> Programming >> Tire Pressure Monitor (TPM) Sensor Programming >> Programming Sensors
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming Sensors

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Make sure the vehicle has been stationary for at least 2 minutes before attempting to program the TPM sensors.
  1. Turn ignition on. Press Driver Information Center (DIC) RESET button to clear any Instrument Panel Cluster (IPC) warning messages. See Figure . Press DIC OPTIONS button until IPC display is blank.
  2. Press and hold DIC RESET button for 3 seconds. Press DIC OPTIONS button again until TIRE TRAINING message appears. Press DIC RESET button until IPC LEARN L FRONT TIRE message appears to begin programming sequence.
    NOTE: TPM Sensor Programming Tool (J 41760) is a large magnet.
  3. Install TPM Sensor Programming Tool (J 41760) over left front wheel valve stem. See Figure . Vehicle horn will sound, indicating TPM sensor is programmed. Proceed to next TPM sensor as directed by IPC messages.
scientia non olet · About LEMON Manuals