Removal & Installation
WARNING: This page is about a different car, the 2000 Chevrolet Corvette and 1999 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Pull inside door handle to access door handle bezel locking tabs. Insert a screwdriver below bezel. Pry downward while pulling on bezel. Remove bezel.
- Remove power window switch. See DOOR LOCK/UNLOCK SWITCH . Remove 2 screws hidden behind pull handle. Pry door panel clips to remove door trim panel. Remove door panel with speaker grill.
- Remove screws attaching door control module to door. Disconnect electrical connectors and remove DCM from vehicle. To install, reverse removal procedure.