Controller Replaced:

BCM:

1. The new service BCM will automatically learn the voltage code from the Passlock sensor.
2. Password from the BCM to the PCM/ECM requires the Saturn Service Stall to learn the new password in order to enable fuel and start the vehicle. Initiate the 10-minute relearn procedure.
3. RKE transmitters will carry over from the previous BCM when using the Saturn Service Stall System.

PCM: (4 cylinder)

1. The Saturn Service Stall System will be required, initiate the 10-minute relearn for the fuel enable password from the existing BCM.

ECM: (6 cylinder)

1. The Saturn Service Stall System will be required initiate the 10-minute relearn for the fuel enable password from the existing BCM.

TCM: (6 cylinder)

1. No relearn required for controller replacement.

Passlock Sensor (Ignition Module)

1. The Saturn Service Stall will be required to initiate the 10-minute relearn procedure for the existing BCM.