Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Audio/Video Interface Module

Courtesy of GENERAL MOTORS CORP.

Remove the radio. Refer to Radio Replacement .
Disconnect the electrical connectors from the rear-seat audio tee (RSAT) module.
Remove the double-sided tape from the back of the RSAT module (1) using a plastic flat-bladed tool.
Remove the RSAT module from the vehicle.
Remove all of the adhesive residue by using a razor knife and an isopropyl alcohol.