Installation Procedure
WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the cruise control throttle cable to the cruise control module connecting strap.
- Install the cruise control throttle cable to the cruise control module by rotating 1/4 turn clockwise.
- Install the cruise control module with the throttle cable into the frame rail bracket and install the attachment bolts.
Tighten: Tighten the cruise control module to frame rail bracket bolts to 10 N.m (89 lb in).
- Install the throttle cable clip to the front of the dash stud.
- (1) - Cruise Control Throttle Cable
- (2) - Adjuster (Shown here, actually further back on cable)
- (3) - Cable Snap
- (4) - Cable End
- Install the cruise control throttle cable snap to the throttle body cam.
- Install the cruise control throttle cable to both attachment clips.
- Connect the cruise control module harness connector. Push in until a click is heard and pull back to confirm a positive engagement.
- Adjust the cruise control throttle cable. Refer to Cruise Control Throttle Cable Adjustment .
IMPORTANT:
Do not twist the connecting strap during installation.