Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.

Disable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM in Air Bag Restraint Systems.

Fig 1: Removing Shift Lock Control Solenoid Electrical Terminals From Connector Body
Courtesy of GENERAL MOTORS CORP.
Remove the automatic transaxle control assembly. Refer to Shift Control Replacement in Automatic Transaxle - 4T40-E/4T45-E (Overhaul).
Using an electrical terminal pick, remove the shift lock control solenoid electrical terminals (black wires) from the connector body.
Move the control assembly out of the PARK (P) position and remove the park lock switch by pressing the switch retaining tabs.

Fig 2: Removing & Installing Park Lock Switch
Courtesy of GENERAL MOTORS CORP.
Remove the park lock switch connector body from the control assembly, and remove the switch assembly.