Ground Circuits
WARNING: This page is about a different car, the 2003 Saturn LW300 and 2003 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
- Using DVOM, check for continuity to ground at ECM ground terminals. Resistance should be less than 5 ohms. If resistance is not less than 5 ohms, repair open in ground circuit.
- Connect negative lead of DVOM to a good ground. Backprobe positive lead of DVOM to each ECM ground terminal. With vehicle running, DVOM should indicate less than one volt. If DVOM reading is greater than one volt, check for open, short to voltage, corrosion or loose connection in ground circuit.