LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2002 >> SL2 Automatic, MP6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Entertainment System) >> Repair Instructions >> Bose Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Signal Processing Module At Steering Column Bracket
    GM65115Courtesy of GENERAL MOTORS CORP.
  1. Install the Bose® signal processing module into position on the steering column bracket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the Bose® signal processing module retaining bolts.

    Tighten:  Tighten the Bose® signal processing module retaining bolts to 2.5 N.m (22 lb in).

    3. Fig 2: Electrical/Audio Connector At Bose® Signal Processing Module
    GM65118Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical/audio connector to the signal processing module.
  4. Install the IP left lower insulator panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
  5. Install the RDO/ANT MiniFuse® #24 to the IP electrical center.
  6. Install the cover to the I/P electrical center.
  7. Install the front floor kick -up panel. Refer to Kick -Up Panel Replacement - Front Floor in Interior Trim.
scientia non olet · About LEMON Manuals