Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front floor kick -up panel. Refer to Kick -Up Panel Replacement - Front Floor in Interior Trim.
Remove the cover from the I/P electrical center.
Remove the RDO/CD MiniFuse® #5 from the I/P electrical center.

Fig 1: Electrical/Audio Connector At Remote CD Changer
Courtesy of GENERAL MOTORS CORP.
Open the rear lift window panel.
Remove the center rear storage compartment cover.
Reposition the carpet in the center rear storage compartment to expose the base of the remote compact disc (CD) changer.
Disconnect the electrical/audio connector from the remote compact disc (CD) changer.

Fig 2: Remote CD Changer & Mounting Nuts

Courtesy of GENERAL MOTORS CORP.

Remove the nuts mounting the remote CD changer to the center rear storage compartment rear wall.
Remove the remote CD changer from the vehicle.

Fig 3: CD Mounting Brackets & Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the remote CD changer mounting bracket bolts.
Remove the mounting brackets from the remote CD changer.

IMPORTANT: Reinstall the transportation pin when shipping or transporting the remote CD changer.

If shipping or transporting the remote CD changer, reinstall the transportation pin by inserting into the original position and fixing in place with clear tape.