LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2003 >> L200 Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation >> Fuel Systems >> Fuel Pump Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Module: Removal

  1. Remove fuel tank. See FUEL TANK  . Disconnect fuel lines from fuel pump module. Using Fuel Tank Lock Ring Remover (J43827), remove fuel pump module retaining ring. A 1/2" breaker bar (approximately 18" long) will easily loosen and remove the lock ring.
  2. To prevent bending of the sending unit float arm during removal, lift the pump module up slightly to disengage the orientation tabs in the tank and rotate the module 45 degrees. Remove the fuel pump from fuel tank.
  3. Always replace fuel pump module to tank seal "O" ring whenever assembly is removed. Discard fuel pump module to tank seal. If sending unit is not being replaced as well, remove fuel level sender. See FUEL SENDER UNIT & FLOAT  .