LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2003 >> L200 Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation >> Ignition Systems >> Electronic Ignition Module >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Electronic Ignition Module: Installation

  1. Ensure EI module gasket is correctly placed around EI module. Install EI module and EI module attachment bolts. Tighten bolts to specification. See TORQUE SPECIFICATIONS  .
  2. Connect EI module harness connector. Push connector until the lock position is felt, then pull back to confirm engagement. Install upper intake manifold. See AIR INDUCTION SYSTEMS  .
  3. Connect negative battery cable. Tighten negative battery terminal bolt to specification. Reset all preset radio stations and set clock to correct time.
Fig 1: Removing/Installing EI Module (2.2L)
G00158370Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing/Installing EI Module (3.0L)
G00158384Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals