LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2003 >> L200 Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Shift Lock Control) >> Repair Instructions >> Shift Lock Solenoid/Switch Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM in Air Bag Restraint Systems.
    Fig 1: Removing Shift Lock Control Solenoid Electrical Terminals From Connector Body
    GM893818Courtesy of GENERAL MOTORS CORP.
  2. Remove the automatic transaxle control assembly. Refer to Shift Control Replacement in Automatic Transaxle - 4T40-E/4T45-E (Overhaul).
  3. Using an electrical terminal pick, remove the shift lock control solenoid electrical terminals (black wires) from the connector body.
  4. Move the control assembly out of the PARK (P) position and remove the park lock switch by pressing the switch retaining tabs.
    Fig 2: Removing & Installing Park Lock Switch
    GM893820Courtesy of GENERAL MOTORS CORP.
  5. Remove the park lock switch connector body from the control assembly, and remove the switch assembly.
scientia non olet · About LEMON Manuals