Scan Tool Data List Definitions
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.
The column labeled Data List indicates where a parameter is located on the scan tool. Review the scan tool operating manual for the exact locations of the data lists. The following is a description of each term listed.
- ALL
The parameter is in all of the data lists indicated below. - Input
General Info-Inputs - Output
General Info-Outputs - FE
Fuel and Emissions - Ign
Ignition - MF
Misfire - Aux
Auxiliary Emissions - Idle
Idle/Speed Control - Eng
Engineering - FF
Freeze Frame Data List - FR
Failure Record Data List