LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2003 >> Vue 2.2 D, AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation >> Ignition Systems >> Electronic Ignition Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronic Ignition Module: Installation

  1. Install gasket to ignition module. Apply dielectric compound to spark plug boots and ensure no corrosion is present. Install ignition module housing assembly with spark boots into position, then install bolts. Tighten bolts to specification. See TORQUE SPECIFICATIONS  .
  2. Connect EI module harness connector. Push connector until the lock position is felt, then pull back to confirm engagement. Install upper intake manifold. See INTAKE MANIFOLD & SPACER (3.0L)  under AIR INDUCTION SYSTEMS.
  3. Connect negative battery cable. Tighten negative battery terminal bolt to specification. Reset all preset radio stations and set clock to correct time.
Fig 1: Removing/Installing EI Module (2.2L)
G00158370Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing/Installing EI Module (3.0L)
G00158384Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals