LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2004 >> Ion 1 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers System And Washers System >> Repair Instructions >> Wiper Drive System Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the wiper module assembly into the plenum.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the fasteners attaching the wiper module assembly to the plenum.

    Tighten:  Tighten the fasteners to 10 N.m (89 lb in)

  4. Connect the wiring connector to the wiper motor.
  5. Fig 1: View Of Wiper Module Assembly
    GM869668Courtesy of GENERAL MOTORS CORP.
  6. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  7. Install the wiper arms. Refer to Wiper Arm Replacement .