LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2004 >> Ion 1 Standard >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Multifunction, Turn Signal Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the multifunction turn signal switch to the steering column.

    Tighten:  Tighten the multifunction turn signal switch screws to 2 N.m (17 lb in).

  2. Connect the multifunction turn signal switch harness connector.
  3. Fig 1: View Of Multifunction Turn Signal Switch
    GM878308Courtesy of GENERAL MOTORS CORP.
  4. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .