Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Battery Current Sensor

Courtesy of GENERAL MOTORS CORP.

Install the battery current sensor by passing the ground end of the negative battery cable through the sensor.

IMPORTANT: Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable.

Wrap electrical tape around the battery current sensor in order to secure the battery current sensor to the negative battery cable.
Install the battery to battery tray negative battery cable. Refer to Battery Negative Cable Replacement (Battery to Battery Tray) or Battery Negative Cable Replacement (Engine to Chassis) .