Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Wipers/Washer Signal Switch Retaining Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the wipers/washer signal switch to the steering column.
Tighten: Tighten the wipers/washer signal switch screws to 2 N.m (17 lb in).
Connect the wipers/washer switch harness connector.
Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement (Except Redline) or Steering Column Trim Covers Replacement (Redline) in Steering Wheel and Column.