Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.

Turn OFF the ignition.
Drain the coolant system to below the engine coolant temperature (ECT) sensor. Refer to Draining and Filling Cooling System (2.2L (L61)) or Draining and Filling Cooling System (2.0L (LSJ)) in Engine Cooling.
Disconnect the engine coolant temperature ECT sensor electrical connector.
Carefully remove the ECT sensor (1).

Fig 1: Locating ECT Sensor, Boost Control Solenoid, & IAT Sensor

Courtesy of GENERAL MOTORS CORP.