Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.

Press the IAT sensor (3) into the engine.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the IAT sensor bolt.
Tighten: Tighten the bolt to 10 N.m (89 lb in).

Fig 1: Locating ECT Sensor, Boost Control Solenoid, & IAT Sensor

Courtesy of GENERAL MOTORS CORP.

Connect the IAT sensor harness connector.