Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the intake air temperature (IAT) sensor harness connector.

Fig 1: View Of IAT Sensor Harness Connector

Courtesy of GENERAL MOTORS CORP.

Loosen the air cleaner assembly clamp.
Disconnect the air cleaner assembly clips.
Remove the upper air cleaner cover.

Fig 2: Exploded View Of Air Cleaner Filter

Courtesy of GENERAL MOTORS CORP.

Remove the air cleaner filter from the lower air cleaner housing.
Inspect the air cleaner filter for dust, dirt, and water contamination.
Replace as necessary. Refer to Maintenance Schedule in Maintenance and Lubrication.