Installation Procedure
WARNING: This page is about a different car, the 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
- Position the intake duct assembly.
- Install the intake duct assembly bolt.
Tighten: Tighten the bolt to 10 N.m (89 lb ft).
- Install the intake duct assembly push in fasteners.
- Install the right front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
- Install the right front tire and wheel. Refer to Tire and Wheel Removal and Installation in Tire and Wheels.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.