Installation Procedure
WARNING: This page is about a different car, the 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air outlet resonator to the throttle body.
- Connect the fresh air duct to the air outlet resonator.
- Tighten the air outlet resonator to throttle body clamp.
Tighten: Tighten the clamp to 5 N.m (44 lb in).
- Align the air outlet resonator to the bracket and install the push-pin fastener.
- Connect the air cleaner assembly fresh air duct to the air outlet resonator.
Tighten: Tighten the clamp to 5 N.m (44 lb in).
- Connect the IAT sensor harness connector.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.