Alignment Procedure
WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
- If available remove the yellow tab (2) and save for reassembly.
- Gently rotate the coil hub (1) clockwise until a slight tension is present.
- Count the number of revolutions, while gently rotating the coil hub (1) counter clockwise until a slight tension is present.
- Gently rotate the coil hub (1) clockwise one half of the previously counted revolutions.
- Rotate the coil hub as required to align the yellow tab (2).
- Install the yellow tab (2) into the coil hub. Use tape if the tab is unavailable.
NOTE:
The new SIR coil assembly will be centered. Improper alignment of the SIR coil assembly may damage the unit, causing an inflatable restraint malfunction.