LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2004 >> VUE 2WD V6-3.5L VIN 4 >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module: Service and Repair

POWERTRAIN CONTROL MODULE (PCM) REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the battery negative cable.
2. Disconnect the wiring harness.
3. Depress the retaining tab and remove the powertrain control module (PCM).
4. Remove the PCM from the housing.

INSTALLATION PROCEDURE




1. Install the PCM into the housing bracket.
2. Connect the wiring harness.
3. Connect the battery negative cable.
4. Program the PCM. Refer to Service Programming System (SPS) in Programming. Programming and Relearning
5. Perform the Idle Learn procedure. Refer to Idle Learn Procedure. Programming and Relearning
scientia non olet · About LEMON Manuals