LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Ion 1 Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Introduction & Repair Instructions >> Repair Instructions >> Shift Control Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the shift control to the vehicle.
  2. Connect the shift lock solenoid harness connector.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the shift control nuts.

    Tighten:  Tighten the shift control nuts to 25 N.m (18 lb ft).

  5. Connect the shift cable to the shift control assembly.
  6. Fig 1: View Of Shift Control
    GM851244Courtesy of GENERAL MOTORS CORP.
  7. Install the console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages, and Console.