Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.

Install the MAF sensor into the air cleaner housing.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Secure the MAF sensor to the air cleaner housing with the 2 fasteners.
Tighten: Tighten the 2 fasteners to 2 N.m (18 lb in).
Connect the MAF sensor electrical connector.

Fig 1: View Of MAF Sensor

Courtesy of GENERAL MOTORS CORP.